If you’re stuck with a blocked drain, you may wonder how to clear it. Luckily, you can take a few easy steps to clear your drain. Boiling water can break up a blockage in a gutter and loosen up a joint. If you’re using PVC pipes, hot tap water should do the trick, but it’s not guaranteed to clear a solid blockage.
A straightforward way to clear a clogged drain is to mix bicarbonate of soda with vinegar. When combined, the bicarb soda will create a fizzing effect, which can help to break up the blockage. This solution also contains baking soda, which reacts with the vinegar and can remove grease and other blockages. Add the mixture to the clogged drain, wait for a few minutes, and then flush the clogged drain with hot water. You can try this method for the first few times.
A kitchen sink drain will often clog because of grease and eggshells. In addition to soap and food particles, grease and oil can build up in the drain pipe. A professional plumber should consult if the clog is not cleared quickly. They can also remove a drain, but the process can be costly. For this reason, it’s best to use a power drill with a 50-foot cable.
While hot water flushing will remove the blockage, it can damage plastic pipes and create future problems. Also, if you’re unsure what to use, you can use a clothes hanger as a fishing tool. Another effective way to clear a blocked drain is to remove any food scraps. The scraps can clog the pipes, so don’t dump them down the drain. In addition, grease waste can cause a blockage, as many fats solidify at room temperature.
Another method of clearing a blocked drain involves using baking soda and vinegar. Baking soda is alkaline, while vinegar is acetic. When these two substances are mixed, they react dramatically, dislodging clogs. Afterward, boil some water to flush the drain. However, this method can take a while, so it’s best to use it as a last resort.
If you’re having trouble clearing a drain, try using a wet and dry shop vacuum. You should feed the wire into the gutter and crank it until it breaks through the clog. This method should work to clear a drain, but you may need to repeat it several times. For stubborn clogs, you can also try using a wire hanger to get rid of them.
If the boiling water method doesn’t work, try using a wet and dry shop vacuum to unclog your drain. First, ensure an empty bucket underneath the pipe, so you don’t spill anything. Once you have removed any debris or water, you can use a plumber’s wrench to loosen the slip nuts at the end of the pipe. If the drain still isn’t clear, pour boiling water down the drain.
